[Elecraft] hi cut/low cut not work in CW?

[Joe Subich, W4TV]

 > Turn CONFIG:CW QRQ to OFF.

and/or reset CONFIG:SHIFT=0.01 to SHIFT=0.05

73,

    ... Joe, W4TV


On 3/20/2013 8:46 AM, Mike K2MK wrote:
> Hi Brian,
>
> Turn CONFIG:CW QRQ to OFF.
>
> 73,
> Mike K2MK
>
>
> alsopb wrote
>> I was doing something odd.  Stock 2.7KHz filter, CW mode, V4.61.
>> Removed all equalization.
>>
>> Wanted to adjust high cut or low cut.  Tapped shift control.  Did not
>> revert to high cut/low cut mode.  Ditto for tapping width control.
>>
>> Can't simulate this with shift because of it's limited range.
>>
>> High cut/low cut works fine in SSB mode.
>>
>> 73 de Brian/K3KO
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/hi-cut-low-cut-not-work-in-CW-tp7571545p7571546.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>