[Elecraft] KXPA100

[Don Wilhelm]

I got a response from one of the developers working with the KXPA100 and 
the KXAT100 that the one his tape measure said it was 4 5/8 inches wide, 
4 inches high and 9 inches in depth.  So my 'eye calibration' was not 
far off the actual dimensions.

73,
Don W3FPR
-----------------------------------------------------------

The one I saw at Dayton was about 4.5 by 4.5 inches on the face 
(including the heat sink), and about 10 inches in depth.  Those 
measurements are not exact, and only represent the accuracy of my 
"calibrated eye".  The KXPA3 took up about 1 3/8 vertical inches of 
panel space and the vertical height of the KXAT3 was the same.

My 'eye' was 'calibrated' after 10 years of running a custom woodworking 
shop, where I was acclimated to making approximate measurements.  When 
the real measurements are revealed, it will be interesting to compare my 
approximations - my skills with that stuff are now 13 years old.

73,
Don W3FPR