[Elecraft] Rotor control

[Greg]

I use one of these and it has worked great.

http://gridconnect.com/industrial-ethernet/ethernet-adapter/uds2100.html

73 and Merry Christmas.
Greg
AB7R

On Tue, Dec 24, 2013 at 2:04 PM, Mitch Wolfson DJØQN <dj0qn at gmx.net> wrote:

> David,
>
> Assuming you already have serial control of your rotor, then I can suggest
> two ways to control remotely without using a PC at the radio side:
>
> 1) If you are not using the RRC's COM1, you can use that to control the
> rotor as well. This passes the serial port over the internet
>
> 2) If you are already using COM1 for something else (e.g. for CAT support
> under the K3 Twin mode), then you can buy a separate serial port server
> device, such as from Lantronix or Moxa. These need to be setup in a similar
> manner to the RRC, i.e. port forwards in the router, etc. Then you install
> a serial port redirector on your local PC that accesses these serial ports
> over the internet through your normal control software.
>
> 73,
> Mitch DJ0QN
>
> On 24.12.2013 22:20, David Christ wrote:
>
>> When using Remote Rig for running a remote K3, what are people using for
>> rotor control?
>>
>> David K0LUM
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>> --
>> Mitch Wolfson
>> DJØQN / K7DX
>> Neubiberger Str. 21, 85640 Putzbrunn
>> Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436
>> Echolink: 3001 - IRLP: 5378
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>