[Elecraft] Error message ERR DSE

[DGB]

Running N1MM. The transmissions it occurs on are such as short as "W4TV 
599 4 4 NS9I", so not long but only occurs when transmitting not on 
receiving.

I was running in the rtty TEST today, or trying too!

Only running one cluster and have that filtered so not many spots coming 
thru.

thanks 73 Dwight NS9I

On 12/21/2013 4:30 PM, Joe Subich, W4TV wrote:
>
> What logging software are you running and how long are your
> transmissions?  The problem appears to be heavily correlated
> with logging software that polls aggressively (or users that
> are trying to poll from multiple applications at the same time)
> and long transmissions.  Essentially, the heavy polling over-
> runs the K3's control processor and eventually the garbled input
> generates a pathological command.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 12/21/2013 5:21 PM, DGB wrote:
>> I am getting the error message only with RTTY.
>>
>> It don't matter if I run full legal limit or no amp with the rig power
>> cranked down to QRP, so it's not RF in the shack problem. It's fine on
>> all other modes.
>>
>> I searched the archives and read reference to a DSP problem  and
>> reloaded the firmware several times over the last few weeks. In addition
>> I saw reference to re-seating the front panel board. I disassembled the
>> K3 today, did that and most all the other connections.
>>
>> Same symptoms are there.
>>
>> The exact err msg is
>>
>> E 00300 30
>> ERR DSE
>>
>> Anyone else had this problem and how was it resolved?
>>
>> TIA 73 Dwight NS9I
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>