[Elecraft] Error message ERR DSE

[Joe Subich, W4TV]

What logging software are you running and how long are your
transmissions?  The problem appears to be heavily correlated
with logging software that polls aggressively (or users that
are trying to poll from multiple applications at the same time)
and long transmissions.  Essentially, the heavy polling over-
runs the K3's control processor and eventually the garbled input
generates a pathological command.

73,

    ... Joe, W4TV


On 12/21/2013 5:21 PM, DGB wrote:
> I am getting the error message only with RTTY.
>
> It don't matter if I run full legal limit or no amp with the rig power
> cranked down to QRP, so it's not RF in the shack problem. It's fine on
> all other modes.
>
> I searched the archives and read reference to a DSP problem  and
> reloaded the firmware several times over the last few weeks. In addition
> I saw reference to re-seating the front panel board. I disassembled the
> K3 today, did that and most all the other connections.
>
> Same symptoms are there.
>
> The exact err msg is
>
> E 00300 30
> ERR DSE
>
> Anyone else had this problem and how was it resolved?
>
> TIA 73 Dwight NS9I
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>