[Elecraft] K3 will not display decoded CW

[Craig - AE6RR]

Hi Fred,

I have tried tapping the DISP key several times and tried with both alt data
and VFO B.  The CWT indicator does not blink when I adjust the threshold
either, so it may be a decoding problem.

I am testing with a K3/0 and the remote rig boxes, getting ready to deploy
the main K3/100 to a remote site so I am not sure that I want to deploy with
Beta firmware as you cannot re-flash the firmware remotely if there are
other problems.  How stable is the 4.58 version?

BTW, I did test this with just the K3/100 in local mode also.

Thanks to Greg, AB7R for responding also.

73,
- Craig, AE6RR

-----Original Message-----
From: Cady, Fred [mailto:fcady at ece.montana.edu] 
Sent: Friday, November 16, 2012 4:27 AM
To: Craig - AE6RR; elecraft at mailman.qth.net
Subject: RE: [Elecraft] K3 will not display decoded CW

Hi Craig,
4.51 does have some problems decoding CW and the beta 4.58 is better.
Also, you want to be displaying VFO B and not the alternate display.
Cheers and 73,
Fred KE7X 

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Craig - AE6RR
Sent: Friday, November 16, 2012 12:55 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 will not display decoded CW

BTW my firmware is 04.51 which the utility says is the latest.

73,
- Craig, AE6RR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Craig - AE6RR
Sent: Thursday, November 15, 2012 11:50 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 will not display decoded CW


I think that I have gotten my K3 in a funny mode somehow.  It will not
display decoded CW in the VFO B area.  I turned on the TEXT DECODE and
adjusted the threshold as described in the manual.  The "T" is displayed in
the lower right corner of the display.  I can tap the DISP key and see the
clock and other setting but no  CW decode is displayed.  I have the latest
firmware installed.  This feature used to work but I haven't used it for a
while.

 Any ideas?

73,
- Craig, AE6RR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html