[Elecraft] K3 will not display decoded CW

[Cady, Fred]

Hi Craig,
4.51 does have some problems decoding CW and the beta 4.58 is better.
Also, you want to be displaying VFO B and not the alternate display.
Cheers and 73,
Fred KE7X 

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Craig - AE6RR
Sent: Friday, November 16, 2012 12:55 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 will not display decoded CW

BTW my firmware is 04.51 which the utility says is the latest.

73,
- Craig, AE6RR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Craig - AE6RR
Sent: Thursday, November 15, 2012 11:50 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3 will not display decoded CW


I think that I have gotten my K3 in a funny mode somehow.  It will not
display decoded CW in the VFO B area.  I turned on the TEXT DECODE and
adjusted the threshold as described in the manual.  The "T" is displayed
in the lower right corner of the display.  I can tap the DISP key and
see the clock and other setting but no  CW decode is displayed.  I have
the latest firmware installed.  This feature used to work but I haven't
used it for a while.

 Any ideas?

73,
- Craig, AE6RR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html