[Elecraft] K3 will not display decoded CW

[Greg]

Craig,  Try tapping DISP again.  If you tell the radio to display the
alternate data with the DISP control that is all you will see...no
decoded text will show.



On 11/15/12, Craig - AE6RR <ae6rr at pacbell.net> wrote:
>
> I think that I have gotten my K3 in a funny mode somehow.  It will not
> display decoded CW in the VFO B area.  I turned on the TEXT DECODE and
> adjusted the threshold as described in the manual.  The "T" is displayed in
> the lower right corner of the display.  I can tap the DISP key and see the
> clock and other setting but no  CW decode is displayed.  I have the latest
> firmware installed.  This feature used to work but I haven't used it for a
> while.
>
>  Any ideas?
>
> 73,
> - Craig, AE6RR
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>