[Elecraft] K3: How to setup K3 with Signalink-USB ?

[Joe Subich, W4TV]

If you are using a serial cable for PTT (CONFIG:PTT-KEY), Windows
will pulse the DTR and RTS lines during the boot process.

73,

    ... Joe, W4TV


On 11/16/2012 5:54 AM, Joel Black wrote:
> To either of you, what is your default sound card?
>
> I ran into a similar problem while experimenting with Win8 - upon
> boot-up, the radio would key several times.  The SignaLink microphone
> was the default mic input.  I changed it to something else and that
> problem disappeared.
>
> 73,
> Joel - W4JBB
>
> On 11/15/2012 6:09 AM, Mike Harris wrote:
>> My Dell Win7/64 box keys the K3 seven times in a burst on boot up.  If
>> the K3 is already on I just enable TX test until boot up has completed.
>>
>> Regards,
>>
>> Mike VP8NO
>>
>> On 15/11/2012 08:53, KD7YZ Bob wrote:
>>> Howdy K3' people:
>>>
>>> I have another 'Newbie User' Question.
>>>
>>> This one regards the fact that I notice when the K3 is already on AND I
>>> then turn-on the Windows-7 machine, at some point the rig switches to
>>> Xmit. Per the manual, it goes into "Test" mode, and thus, no RF Power.
>>>
>>> No other "Radio" software programs had been "Started" yet.
>>>
>>> K3 associated with COM1 which is 38400-8N1/Xon/Xoff
>>> K3 Baud Rate to 38400
>>>
>>> This,  for me anyway, repeatable.
>>>
>>> While not a problem OF the K3, whatever I haven't set up is annoying.
>>>
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>