[Elecraft] K3: How to setup K3 with Signalink-USB ?

[Joel Black]

To either of you, what is your default sound card?

I ran into a similar problem while experimenting with Win8 - upon 
boot-up, the radio would key several times.  The SignaLink microphone 
was the default mic input.  I changed it to something else and that 
problem disappeared.

73,
Joel - W4JBB

On 11/15/2012 6:09 AM, Mike Harris wrote:
> My Dell Win7/64 box keys the K3 seven times in a burst on boot up.  If
> the K3 is already on I just enable TX test until boot up has completed.
>
> Regards,
>
> Mike VP8NO
>
> On 15/11/2012 08:53, KD7YZ Bob wrote:
>> Howdy K3' people:
>>
>> I have another 'Newbie User' Question.
>>
>> This one regards the fact that I notice when the K3 is already on AND I
>> then turn-on the Windows-7 machine, at some point the rig switches to
>> Xmit. Per the manual, it goes into "Test" mode, and thus, no RF Power.
>>
>> No other "Radio" software programs had been "Started" yet.
>>
>> K3 associated with COM1 which is 38400-8N1/Xon/Xoff
>> K3 Baud Rate to 38400
>>
>> This,  for me anyway, repeatable.
>>
>> While not a problem OF the K3, whatever I haven't set up is annoying.
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>