[Elecraft] K3: How to setup K3 with Signalink-USB ?

[KD7YZ Bob]

W3fpl & K2VCO tapped out:

> If one doesn't do CW via DTR/RTS you can turn off the CONFIG PTT-KEY 
> (set it to OFF-OFF). Then the boot process won't affect the K3. I 
> finally got so annoyed by this that I got a WinKey USB. The 
> computer-generated CW is cleaner, too.

> Do you have the K3 set to activate either keying or PTT from the DTR or
> RTS lines (CONFIG: PTT-KEY menu set to something other than OFF-OFF

thanks Vic and Don .. I'd forgotten that I DID set that before I had the
interface cable from K3 to SignaLink-USB.

now set to "OFF-OFF"

-- 
73
KD7YZ Bob