[Elecraft] P3SVGA 1920x1080

[Jeff Cochrane - VK4BOF]

Bruce,
>From your description it seems to me that whilst the resolution is correct 
for your monitor, the refresh rate is not.
This is indicated by the image being offset to one side as you describe.
I dont know what the refresh rate is for the SVGA adaptor at 1920 x 1080 is 
but I'll bet that it's not what your monitor needs or wants.

73 de
Jeff Cochrane - VK4XA
East Innisfail
QLD, Australia
K3 #4257, P3 #1629, KPA-500 #161

----- Original Message ----- 
From: "Bruce Beford" <bruce.beford at myfairpoint.net>
To: <elecraft at mailman.qth.net>
Sent: Friday, March 23, 2012 8:09 AM
Subject: Re: [Elecraft] P3SVGA 1920x1080


>
> I installed the P3SVGA board in my unit yesterday. On mine, it also does 
> not
> display properly in 1920x1080. I have an Acer H243H monitor. It natively
> supports "Full HD", 1920x1080p. When I set the P3 SVGA output to 
> 1920x1080,
> the monitor confirms that it has switched to that resolution. However, the
> P3 image appears to extend off the right of the screen. That is to say, 
> the
> full span to the right is not displayed. The vertical span is fine. There
> also appear to be small white dots moving horizontally through the 
> spectrum
> portion of the display, as if the display is "wrapping" somehow. (This is 
> no
> doubt an inaccurate description, but the best I can do. I have tried
> reloading all firmware (1.12) and FPGA files to no effect.
>
> Note that the monitor displays my PCs output at 1920x1080 using the DVI
> (rather than VGA) input with no problems, so I know the monitor is 
> capable.
>
> For now, I am running at 1440x900 from the P3 with no problems.
>
> 73,
> Bruce, N1RX
>
>> 1080 overflows my 1080P monitor also.  <snip>
>> Rick
>> K6LE
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html