[Elecraft] P3SVGA 1920x1080

[radiobuf at comcast.net]

Hi Bruce, I have the same problem with my monitor and its brand new 1080P HD. I am also having to use the 1440 x 900. 
So I guess this will have to do until they update the software. 
Ed 

----- Original Message -----
From: "Bruce Beford" <bruce.beford at myfairpoint.net> 
To: elecraft at mailman.qth.net 
Sent: Thursday, March 22, 2012 6:09:22 PM 
Subject: Re: [Elecraft] P3SVGA 1920x1080 


I installed the P3SVGA board in my unit yesterday. On mine, it also does not 
display properly in 1920x1080. I have an Acer H243H monitor. It natively 
supports "Full HD", 1920x1080p. When I set the P3 SVGA output to 1920x1080, 
the monitor confirms that it has switched to that resolution. However, the 
P3 image appears to extend off the right of the screen. That is to say, the 
full span to the right is not displayed. The vertical span is fine. There 
also appear to be small white dots moving horizontally through the spectrum 
portion of the display, as if the display is "wrapping" somehow. (This is no 
doubt an inaccurate description, but the best I can do. I have tried 
reloading all firmware (1.12) and FPGA files to no effect. 

Note that the monitor displays my PCs output at 1920x1080 using the DVI 
(rather than VGA) input with no problems, so I know the monitor is capable. 

For now, I am running at 1440x900 from the P3 with no problems. 

73, 
Bruce, N1RX 

> 1080 overflows my 1080P monitor also. <snip> 
> Rick 
> K6LE 



______________________________________________________________ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html