[Elecraft] K3 and Heil Pro Set Plus

[Don Wilhelm]

Ron,

Yes, you have it right.  Check the suffix on the ProSet - if it is iC or 
K2, then it has an electret element and will need bias.  AFAIK, all 
others are dynamic and should not have bias turned on.  Everything 
"ProSet" is not equal, there are several types, so be specific about the 
one you have and we can be more clear about the bias.

73,
Don W3FPR

On 2/3/2012 4:27 PM, N6SC wrote:
> I have been given a Heil Pro Set Plus Headphone and want to be sure to plug
> it in correctly at the back of the K3 and set the configuration correctly in
> the radio.  The Pro set has two cables, one, a 1/8 inch mono plug and a 1/8
> inch stereo plug.  Where do each of these go?  The K3 is set up with a
> signalink that uses the line in and line out, I have a radio shack Y-adapter
> plugged into the spkrs port for stereo speakers. Do I place the Heil stereo
> plug into the "Phones' and the mono plug into the mic/mono?  What would be
> the proper configuration setting for being able to listen to the external
> speakers, and/or headset without making any changes?
>
> Thanks,
> Ron
> N6SC
>