[Elecraft] K3 and Heil Pro Set Plus

[iain macdonnell - N6ML]

Don't think there ever was a Pro Set *Plus* with the iCom element -
the "Plus" had both HC4 and IC5 elements, and a switch to select
between them. It does *not* want bias, but likes the "high" setting
(rP.H)

    ~iain / N6ML



On Fri, Feb 3, 2012 at 2:20 PM, Don Wilhelm <w3fpr at embarqmail.com> wrote:
> Ron,
>
> Yes, you have it right.  Check the suffix on the ProSet - if it is iC or
> K2, then it has an electret element and will need bias.  AFAIK, all
> others are dynamic and should not have bias turned on.  Everything
> "ProSet" is not equal, there are several types, so be specific about the
> one you have and we can be more clear about the bias.
>
> 73,
> Don W3FPR
>
> On 2/3/2012 4:27 PM, N6SC wrote:
>> I have been given a Heil Pro Set Plus Headphone and want to be sure to plug
>> it in correctly at the back of the K3 and set the configuration correctly in
>> the radio.  The Pro set has two cables, one, a 1/8 inch mono plug and a 1/8
>> inch stereo plug.  Where do each of these go?  The K3 is set up with a
>> signalink that uses the line in and line out, I have a radio shack Y-adapter
>> plugged into the spkrs port for stereo speakers. Do I place the Heil stereo
>> plug into the "Phones' and the mono plug into the mic/mono?  What would be
>> the proper configuration setting for being able to listen to the external
>> speakers, and/or headset without making any changes?
>>
>> Thanks,
>> Ron
>> N6SC
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html