[Elecraft] Spot button QSYs K3

[Dennis Moore]

I'm using 4.39. I just tested it to double check my previous statement. 
In 10Hz tuning mode it IS changing to 1Hz mode and tuning properly. In 
coarse tune mode (100 Hz), it is not changing tuning rate. I withdraw my 
statement about the 10Hz but stand by the 100Hz.

Thanks for making me check!

73, Dennis NJ6G


On 10/19/2011 3:57 PM, Greg wrote:
> What firmware version is being used?  When using the auto tune 
> function the radio should go into fine tune mode and then turn it off 
> after the tuning is done.
> 73
> Greg
>
>
> On Wed, Oct 19, 2011 at 3:52 PM, Dennis Moore <dennis at mail4life.net 
> <mailto:dennis at mail4life.net>> wrote:
>
>     Others have mentioned the Autospot feature, and here's an
>     observation on
>     that as it relates to your issue of a large freq change.
>
>     If my freq resolution is at 10Hz or 100Hz and I try to Autospot, I
>     will
>     get a 2kHz shift as you described. If, however, I am set to 1Hz
>     resolution, the Autospot feature brings the frequency right where
>     it is
>     supposed to be.
>
>     73, Dennis NJ6G
>