[Elecraft] PSE HELP: K3+N1MM+MMTTY

[Sante - IK0HBN]

Hi again Joe!
Sorry it's not my purpose starting a flame on Microham here, but I 
think that it should be interest of the seller, putting at his best 
his knowledge to make his stuff as useable as possible. We have spent 
3 full days to have it running, without result.

If you did notice, my first post was about of making everything 
running with a  serial cable, as we mentally gave up of seeing the 
stuff really running.
We followed manual at our best we could, BUT, if the things there are 
not fully described, there are hundreds of possibilities you have to 
set, that it's easier winning lottery with a single shot!!

At moment we have the stuff running on SSB (direct TXing and 
Record/play msg from N1MM) ONLY if we put MICROHAM codec for all the 
computer, so whatsoever thing you do which generate a sound, it 
finished into the radio.
BTW it was funny listening the opening of WinXP launched for half a world...hi
Hope things do not have to run such a way and that till now we still 
miss something, otherway it should be crazy having a PC for just one 
application
Ciao for now
Sante




At 16.51 16/11/2011, Joe Subich, W4TV wrote:

>Sante,
>
>Follow the microKEYER II User Manual carefully when setting up
>the MK II/K3 audio.  There are even special instructions for
>setting up "digital" audio for the K3.  I wrote the manual and
>use those exact instructions for configuring my own station -
>they work if followed exactly.
>
>I am not going to duplicate chapters of the User Manual here.
>
>As far as the example configuration for N1MM Logger - the N1MM
>developers made a small change to support SO2R with two radios
>that contained built in sound cards (e.g. IC-7600).  Those
>changes *do not matter* with the K3 and MK II.  If the second
>Radio boxes and "radio CODEC' boxes are left unchecked, there
>is no difference between the most recent N1MM Logger Audio tab
>and that shown in the microHAM example documentation.  I am not
>going to rewrite documents for eight different products every
>time a software writer makes a minor screen change.  It is total
>waste of time when the change does not apply to the interface.
>
>73,
>
>    ... Joe, W4TV
>
>
>On 11/16/2011 10:14 AM, Sante - IK0HBN wrote:
>>Thank you Joe,
>>I suspected this..
>>The reason of the last message, is that we are not able to set a
>>fresh bought Micro Keyer 2 since a week, so we thought to "trash
>>away" it and reverting back to simple cables set.
>>Any of you has the combo K3 + Micro Keyer 2 and wish to help us?
>>CW, MMTTY and MMVARY with N1MM at last had been set.
>>
>>Manual is based on an old version of N1MM and MMTTY , so the several
>>pictures shown on manual are useless to set the program.We lost into
>>AUDIO label in Config menu.
>>We are not able to route VOICE to N1MM with the purpose of recording
>>messages and seeing them played back to radio. My friend spent also
>>money for cables!!! No help from Microham support till now.
>>TIA
>>Sante
>>
>>
>>
>>At 15.20 16/11/2011, Joe Subich, W4TV wrote:
>>
>>>>I need to know if there is a way to go out in TRUE FSK using the CAT
>>>>cable Computer-K3.
>>>
>>>No.  FSK requires an on/off keying (shift) signal connected to the
>>>proper pin on the ACC (DB15HD) connector.
>>>
>>>73,
>>>
>>>     ... Joe, W4TV
>>>
>>>
>>>On 11/16/2011 6:36 AM, Sante - IK0HBN wrote:
>>>>Hi All,
>>>>one of my friend have given several days ago the duty of setting his
>>>>K3 with N1MM and MMTTY. Surely it's a good start for me with this
>>>>radio, but as at moment I'm not an owner of such a cake, I need your help.
>>>>
>>>>Purpose: Using K3 with a single True Serial cable to manage FSK, CW
>>>>and triggering DVK Voice message of K3. This radio has been purchased
>>>>with its internal DVR and I found the G4IFB posting useful to trigger
>>>>DVR memories (http://www.g4ifb.com/html/elecraft_k2_k3.html#TrigerDVR).
>>>>
>>>>I need to know if there is a way to go out in TRUE FSK using the CAT
>>>>cable Computer-K3. I read that CW should be possible, even if CW will
>>>>not be brillant for the delays of WinXP multitasking.
>>>>
>>>>Thank you
>>>>Sante
>>>>
>>>>______________________________________________________________
>>>>Elecraft mailing list
>>>>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>Help: http://mailman.qth.net/mmfaq.htm
>>>>Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>>This list hosted by: http://www.qsl.net
>>>>Please help support this email list: http://www.qsl.net/donate.html
>>
>>______________________________________________________________
>>Elecraft mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Elecraft at mailman.qth.net
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html