[Elecraft] PSE HELP: K3+N1MM+MMTTY

[Greg]

Sante,

If you are using N1MM/MMTTY or any other standard digital mode application
for FSK you MUST build an interface (or purchase one) that connects to pins
1 and 5 on the K3 ACCY port.  FSK can not be keyed via the RS232 port.

For casual operating you CAN use the K3 Utility terminal tab and send
CW/PSK and FSK over the serial port as ASCII  but it is not keying the FSK
lines when you do this.

73
Greg
AB7R



On Wed, Nov 16, 2011 at 3:36 AM, Sante - IK0HBN <ik0hbn at libero.it> wrote:

> Hi All,
> one of my friend have given several days ago the duty of setting his
> K3 with N1MM and MMTTY. Surely it's a good start for me with this
> radio, but as at moment I'm not an owner of such a cake, I need your help.
>
> Purpose: Using K3 with a single True Serial cable to manage FSK, CW
> and triggering DVK Voice message of K3. This radio has been purchased
> with its internal DVR and I found the G4IFB posting useful to trigger
> DVR memories (http://www.g4ifb.com/html/elecraft_k2_k3.html#TrigerDVR).
>
> I need to know if there is a way to go out in TRUE FSK using the CAT
> cable Computer-K3. I read that CW should be possible, even if CW will
> not be brillant for the delays of WinXP multitasking.
>
> Thank you
> Sante
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>