[Elecraft] PSE HELP: K3+N1MM+MMTTY

[Joe Subich, W4TV]

Sante,

Follow the microKEYER II User Manual carefully when setting up
the MK II/K3 audio.  There are even special instructions for
setting up "digital" audio for the K3.  I wrote the manual and
use those exact instructions for configuring my own station -
they work if followed exactly.

I am not going to duplicate chapters of the User Manual here.

As far as the example configuration for N1MM Logger - the N1MM
developers made a small change to support SO2R with two radios
that contained built in sound cards (e.g. IC-7600).  Those
changes *do not matter* with the K3 and MK II.  If the second
Radio boxes and "radio CODEC' boxes are left unchecked, there
is no difference between the most recent N1MM Logger Audio tab
and that shown in the microHAM example documentation.  I am not
going to rewrite documents for eight different products every
time a software writer makes a minor screen change.  It is total
waste of time when the change does not apply to the interface.

73,

    ... Joe, W4TV


On 11/16/2011 10:14 AM, Sante - IK0HBN wrote:
> Thank you Joe,
> I suspected this..
> The reason of the last message, is that we are not able to set a
> fresh bought Micro Keyer 2 since a week, so we thought to "trash
> away" it and reverting back to simple cables set.
> Any of you has the combo K3 + Micro Keyer 2 and wish to help us?
> CW, MMTTY and MMVARY with N1MM at last had been set.
>
> Manual is based on an old version of N1MM and MMTTY , so the several
> pictures shown on manual are useless to set the program.We lost into
> AUDIO label in Config menu.
> We are not able to route VOICE to N1MM with the purpose of recording
> messages and seeing them played back to radio. My friend spent also
> money for cables!!! No help from Microham support till now.
> TIA
> Sante
>
>
>
> At 15.20 16/11/2011, Joe Subich, W4TV wrote:
>
>>> I need to know if there is a way to go out in TRUE FSK using the CAT
>>> cable Computer-K3.
>>
>> No.  FSK requires an on/off keying (shift) signal connected to the
>> proper pin on the ACC (DB15HD) connector.
>>
>> 73,
>>
>>     ... Joe, W4TV
>>
>>
>> On 11/16/2011 6:36 AM, Sante - IK0HBN wrote:
>>> Hi All,
>>> one of my friend have given several days ago the duty of setting his
>>> K3 with N1MM and MMTTY. Surely it's a good start for me with this
>>> radio, but as at moment I'm not an owner of such a cake, I need your help.
>>>
>>> Purpose: Using K3 with a single True Serial cable to manage FSK, CW
>>> and triggering DVK Voice message of K3. This radio has been purchased
>>> with its internal DVR and I found the G4IFB posting useful to trigger
>>> DVR memories (http://www.g4ifb.com/html/elecraft_k2_k3.html#TrigerDVR).
>>>
>>> I need to know if there is a way to go out in TRUE FSK using the CAT
>>> cable Computer-K3. I read that CW should be possible, even if CW will
>>> not be brillant for the delays of WinXP multitasking.
>>>
>>> Thank you
>>> Sante
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>