[Elecraft] KRC2 Setup

[Brendan Minish]

Yes this will get 6m  sent on AUXBUS, BUT the KRC2 (at least the 2 I had
here)  won't decode 6m to a relay driver 

this REALLY is over-due fixing..




On Sun, 2011-05-22 at 19:38 +0000, iain macdonnell - N6ML wrote:
> There's a setting in the K3 that optionally maps the 6m band to 10m.
> If that setting is enabled, you'll be trying to pass 6m through your
> 10m BPF, which probably won't work well :) Go to CONFIG:KRC2 and tap
> the '1' button until you see "bnd6=b6"
> 
> 73,
> 
>     ~iain / N6ML
> 
> 
> 
> On Sun, May 22, 2011 at 6:48 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:
> > I've been loaned a W3NQN bandpass filter setup that uses an Array
> > Solutions FM6 switch box controlled by a KRC2 connected to the Aux Bus
> > of my K3. Everything seems to work fine on 160-10M, with those bands for
> > which there are no filters being bypassed, but 6M doesn't get through
> > the switching network.  There's a KRC2 config utility that I've
> > downloaded and installed, and it fails to show any options for 6M other
> > than for analog voltage band-decoding.  It does tell me that I have the
> > latest version of the KRC2 firmware installed.
> >
> > Documentation on using the KRC2 and the config utility is something that
> > only the programmer's mother could love. It refers to maps, but doesn't
> > tell me how to set up those maps to cover 6M. Can anyone help me get
> > this running by some means other than adding switches to bypass the
> > switching matrix entirely?
> >
> > Thanks and 73, Jim K9YC
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


-- 
73
Brendan EI6IZ