[Elecraft] K3 "REV" button and P3 center frequency freeze

[W9HAK]

For those that responded thanks,  I did a search of the archives and Al 
Bloom is aware of this issue.  So I will continue to have fun and let 
someone else worry about the software fix.

Smith
W9HAK


On 10/7/2010 9:17 AM, David Pratt wrote:
> I get something similar here. The problem only happens after pressing
> REV. If you then press A/B the P3 stays on the VFO A frequency. The P3
> is not actually frozen, but it won't show VFO B until it is powered down
> and then up.
>
> (K3 Firmware 4.12; P3 Firmware 00.38)
>
> 73 de David G4DMP
>
> In a recent message, W9HAK <w9hak at insightbb.com> writes
>> If I push the "REV" button on the K3, the displayed center frequency
>> on the P3 freezes. The K3 responds correctly, that is, it shows "VFO
>> B" frequency. And when I let go of the button it reverts to "VFO A".
>> But the P3 center frequency is frozen on the K3 "VFO A" frequency. The
>> only workaround is to turn off the P3. Kind of a pain since I use the
>> "REV" button to coach on the 'VFO B" while working split operation.
>
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.862 / Virus Database: 271.1.1/3182 - Release Date: 10/07/10 01:34:00
>