[Elecraft] K3 "REV" button and P3 center frequency freeze

[Alan Bloom]

Hi Smith,

This has been fixed in version 04.14 of K3 firmware, which is not yet
released.  I can send you a copy by email if you wish.

Alan N1AL


On Thu, 2010-10-07 at 11:27 -0500, W9HAK wrote:
> For those that responded thanks,  I did a search of the archives and Al 
> Bloom is aware of this issue.  So I will continue to have fun and let 
> someone else worry about the software fix.
> 
> Smith
> W9HAK
> 
> 
> On 10/7/2010 9:17 AM, David Pratt wrote:
> > I get something similar here. The problem only happens after pressing
> > REV. If you then press A/B the P3 stays on the VFO A frequency. The P3
> > is not actually frozen, but it won't show VFO B until it is powered down
> > and then up.
> >
> > (K3 Firmware 4.12; P3 Firmware 00.38)
> >
> > 73 de David G4DMP
> >
> > In a recent message, W9HAK <w9hak at insightbb.com> writes
> >> If I push the "REV" button on the K3, the displayed center frequency
> >> on the P3 freezes. The K3 responds correctly, that is, it shows "VFO
> >> B" frequency. And when I let go of the button it reverts to "VFO A".
> >> But the P3 center frequency is frozen on the K3 "VFO A" frequency. The
> >> only workaround is to turn off the P3. Kind of a pain since I use the
> >> "REV" button to coach on the 'VFO B" while working split operation.
> >
> >
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.862 / Virus Database: 271.1.1/3182 - Release Date: 10/07/10 01:34:00
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html