[Elecraft] Problem connecting LP_Bridge through the P3 to the K3

[Ted Roycraft]

Nevertheless, it's not transparent. Maybe we should allow it to be 
translucent?  :-)

73, Ted, W2ZK

On 8/8/2010 12:22 PM, Joe Subich, W4TV wrote:
>
>    
>>> ... Maybe it is a nit on my
>>> part but the RS-232 port on the P3 is supposed to be transparent to apps
>>> connecting to the K3 via RS-232 and it isn't - not strictly speaking
>>> anyway since LP-Bridge hangs while connecting to the K3 if the P3 is
>>> on.  I figure now is the time to get Elecraft to address these kinds of
>>> things.
>>>        
> I would not be so quick to blame the P3.  P3 works just fine with
> microHAM Router and other port sharing software.  It may be that
> LP-Bridge is too critical of the timing or expects the K3 to respond
> to a particular AI or K3 mode that is incompatible with the P3.
>
> 73,
>
>       ... Joe, W4TV
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>