[Elecraft] Problem connecting LP_Bridge through the P3 to the K3

[Joe Subich, W4TV]

>> ... Maybe it is a nit on my
>> part but the RS-232 port on the P3 is supposed to be transparent to apps
>> connecting to the K3 via RS-232 and it isn't - not strictly speaking
>> anyway since LP-Bridge hangs while connecting to the K3 if the P3 is
>> on.  I figure now is the time to get Elecraft to address these kinds of
>> things.

I would not be so quick to blame the P3.  P3 works just fine with
microHAM Router and other port sharing software.  It may be that
LP-Bridge is too critical of the timing or expects the K3 to respond
to a particular AI or K3 mode that is incompatible with the P3.

73,

     ... Joe, W4TV