[Elecraft] Unable to do PSK

[Greg]

Hi Roy.  There is NO provision for transmitting PSK-D from the ACC
connector.  This feature is ONLY for using the paddles connected to the
paddle input.  If you are going to use a computer you have two options:

1.  Put the radio in PSK-D and decode with the software and send with the
paddles; or

2.  Put the radio in Data-A mode and have the software handle both decode
and encode.

73
Greg
AB7R


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Roy Davis
Sent: Monday, January 12, 2009 2:19 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Unable to do PSK


I have a digital question.

I am using the ACC port on the K3 to do RTTY (FSK D).  I have a box that was
made for me with the appropriate parts for this function.  The cable with
the box from the ACC is connected to a com port on the computer.  Also I
have a audio cable (Stereo) connectors on each end going from the Line out
of the K3 to the Line In on my desktop computer.  It works very well on
RTTY.

I decided to try PSK, and have tried the following method without success.

Since theis cable worked with RTTY in FSK-D  I thought it should work for
PSK.  I tried the same setup with the K3 with DATA MD set to PSK-D 31 bps.
I am able to transmit a signal but I have been told there is no printout on
the receive end.

Any help is appreciated.

Thanks,
Roy - WK4Y
#1366

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com