[Elecraft] Unable to do PSK

[Don Wilhelm]

Roy,

If your PSK application is generating (and expecting) soundcard output, 
PSK D will not work.  For PSK D, you must have the Text Decode turned on 
and the application must display the ASCII text.

If your application is using the soundcard, you must use DATA A.

73,
Don W3FPR

Roy Davis wrote:
> I have a digital question.
>
> I am using the ACC port on the K3 to do RTTY (FSK D).  I have a box that was 
> made for me with the appropriate parts for this function.  The cable with 
> the box from the ACC is connected to a com port on the computer.  Also I 
> have a audio cable (Stereo) connectors on each end going from the Line out 
> of the K3 to the Line In on my desktop computer.  It works very well on 
> RTTY.
>
> I decided to try PSK, and have tried the following method without success.
>
> Since theis cable worked with RTTY in FSK-D  I thought it should work for 
> PSK.  I tried the same setup with the K3 with DATA MD set to PSK-D 31 bps. 
> I am able to transmit a signal but I have been told there is no printout on 
> the receive end.
>
> Any help is appreciated.
>
> Thanks,
> Roy - WK4Y
> #1366
>   
>