[Elecraft] CW to Data for RTTY

[wayne burdick]

Jim,

You need to use FSK-D, not AFSK-A, to do CW-to-RTTY. AFSK-A is an 
audio-transmit mode, like DATA-A, while FSK-D is for "direct" input 
from either a computer or the K3's keyer paddle.

This is covered pretty well in the owner's manual, around page 34 
("CW-to-DATA").

73,
Wayne
N6KR

On Feb 21, 2009, at 3:13 PM, jpk5lad at cox.net wrote:

> I'm trying some new things and I've run into a problem.  I'm trying
> to use the CW to Data for RTTY feature and I don't get any
> results.  If I'm on CW, I can send CW via the paddles, and if I try
> DATA/PSK D (31 bPS) the CW to PSK31 works correctly (outputs
> PSK 31).
> If I try to set up DATA/AFSK A (45 bPS), I get nothing.  Going
> back to the other two configurations, it works properly so I know
> the paddles are working.  This is the first time I've tried it so I 
> can't
> say, "It worked before but not now."
>
> Is there a CONFIG setting that I've missed?
>
> The receive decoder is working properly on RTTY and I'm able to
> decode both on the VFO B display and the K3 Utility's terminal
> screen.
>
> It's just the CW to RTTY sending that's got me "corn-fused"  I
> hope someone will say, "Oh, yeah, I had that same problem and I
> _____________________________________"  I need to know
> what goes in that blank.
>
> Thanks and 73,
> Jim - K5LAD
>
>
>
>
> "It's so simple to be wise. Just think of something
> stupid to say and then don't say it." -- Sam Levenson
> =============================================
> My Web Page - http://www.hayseed.net/~jpk5lad
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

---

http://www.elecraft.com