[Elecraft] CW to Data for RTTY

[jpk5lad at cox.net]

I'm trying some new things and I've run into a problem.  I'm trying 
to use the CW to Data for RTTY feature and I don't get any 
results.  If I'm on CW, I can send CW via the paddles, and if I try 
DATA/PSK D (31 bPS) the CW to PSK31 works correctly (outputs 
PSK 31).
If I try to set up DATA/AFSK A (45 bPS), I get nothing.  Going 
back to the other two configurations, it works properly so I know 
the paddles are working.  This is the first time I've tried it so I can't 
say, "It worked before but not now."

Is there a CONFIG setting that I've missed?

The receive decoder is working properly on RTTY and I'm able to 
decode both on the VFO B display and the K3 Utility's terminal 
screen.

It's just the CW to RTTY sending that's got me "corn-fused"  I 
hope someone will say, "Oh, yeah, I had that same problem and I 
_____________________________________"  I need to know 
what goes in that blank.

Thanks and 73,
Jim - K5LAD




"It's so simple to be wise. Just think of something
stupid to say and then don't say it." -- Sam Levenson
=============================================
My Web Page - http://www.hayseed.net/~jpk5lad