[Elecraft] CW to Data for RTTY

[jpk5lad at cox.net]

Thanks Wayne --
That's the area in the book I'd been looking at and I thought I'd 
tried them all but obviously not.  Sure enough, that works.

Thanks for you help.  Perhaps now I can get those guys at K5D 
on RTTY.  

Hey, you do good work!
73,
Jim - K5LAD


On 21 Feb 2009 at 15:21, wayne burdick wrote:

> Jim,
> 
> You need to use FSK-D, not AFSK-A, to do CW-to-RTTY. AFSK-A is an 
> audio-transmit mode, like DATA-A, while FSK-D is for "direct" input 
> from either a computer or the K3's keyer paddle.
> 
> This is covered pretty well in the owner's manual, around page 34 
> ("CW-to-DATA").
> 
> 73,
> Wayne
> N6KR
> 
> On Feb 21, 2009, at 3:13 PM, jpk5lad at cox.net wrote:
> 
> > I'm trying some new things and I've run into a problem.  I'm trying
> > to use the CW to Data for RTTY feature and I don't get any
> > results.  If I'm on CW, I can send CW via the paddles, and if I try
> > DATA/PSK D (31 bPS) the CW to PSK31 works correctly (outputs
> > PSK 31).
> > If I try to set up DATA/AFSK A (45 bPS), I get nothing.  Going
> > back to the other two configurations, it works properly so I know
> > the paddles are working.  This is the first time I've tried it so I 
> > can't
> > say, "It worked before but not now."
> >
> > Is there a CONFIG setting that I've missed?
> >
> > The receive decoder is working properly on RTTY and I'm able to
> > decode both on the VFO B display and the K3 Utility's terminal
> > screen.
> >
> > It's just the CW to RTTY sending that's got me "corn-fused"  I
> > hope someone will say, "Oh, yeah, I had that same problem and I
> > _____________________________________"  I need to know
> > what goes in that blank.
> >
> > Thanks and 73,
> > Jim - K5LAD
> >
> >
> >
> >
> > "It's so simple to be wise. Just think of something
> > stupid to say and then don't say it." -- Sam Levenson
> > =============================================
> > My Web Page - http://www.hayseed.net/~jpk5lad
> >
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> >
> 
> ---
> 
> http://www.elecraft.com
> 

"It's so simple to be wise. Just think of something
stupid to say and then don't say it." -- Sam Levenson
=============================================
My Web Page - http://www.hayseed.net/~jpk5lad