[Elecraft] Selecting Filters in KRX3

[Ken K3IU]

On K3 #202 with latest firmware and the KRX3, turning the SUB ON, 
enabling BSET, tapping XFIL cycles through the three filters that I have 
on the SubRX... NOT the main board filters.
73,
Ken K3IU


Geoffrey Downs wrote:
> It doesn't on mine. With B Set selected XFIL steps through the filters 
> in the main rx.
>
> 73 to all
>
> Geoff
> G3UCK
>
> ----- Original Message ----- From: "Lothar Sack" <Lothar at Sack-Erding.de>
> To: <elecraft at mailman.qth.net>
> Sent: Monday, September 22, 2008 5:01 PM
> Subject: Re: [Elecraft] Selecting Filters in KRX3
>
>
>> Yes, that is exactly how it works.
>> Filters of the SUB-RX are changed by XFIL or WIDTH
>> after selecting BSET.
>> 55
>> Lothar, DJ8EW
>> K3 wid KRX3  2,7  + 1,0
>>
>>
>> Don Wilhelm schrieb:
>>> Roy,
>>>
>>> According to the manual, the XFIL button will switch between 
>>> filters. Try BSET and then XFIL.
>>> I am not certain that is currently implemented in the firmware, but 
>>> it is worth a try.
>>> I cannot try it because I have only one filter and do not have the 
>>> KRX3.
>>>
>>> 73,
>>> Don W3FPR
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>