[Elecraft] Selecting Filters in KRX3

[Geoffrey Downs]

It doesn't on mine. With B Set selected XFIL steps through the filters in 
the main rx.

73 to all

Geoff
G3UCK

----- Original Message ----- 
From: "Lothar Sack" <Lothar at Sack-Erding.de>
To: <elecraft at mailman.qth.net>
Sent: Monday, September 22, 2008 5:01 PM
Subject: Re: [Elecraft] Selecting Filters in KRX3


> Yes, that is exactly how it works.
> Filters of the SUB-RX are changed by XFIL or WIDTH
> after selecting BSET.
> 55
> Lothar, DJ8EW
> K3 wid KRX3  2,7  + 1,0
>
>
> Don Wilhelm schrieb:
>> Roy,
>>
>> According to the manual, the XFIL button will switch between filters. 
>> Try BSET and then XFIL.
>> I am not certain that is currently implemented in the firmware, but it is 
>> worth a try.
>> I cannot try it because I have only one filter and do not have the KRX3.
>>
>> 73,
>> Don W3FPR
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>