[Elecraft] Selecting Filters in KRX3

[Geoffrey Downs]

You're right Ken. I had missed out the step of turning the Sub on before I 
tried it!

73 to all

Geoff
G3UCK

----- Original Message ----- 
From: "Ken K3IU" <kenk3iu at cox.net>
To: <elecraft at mailman.qth.net>
Sent: Monday, September 22, 2008 6:45 PM
Subject: Re: [Elecraft] Selecting Filters in KRX3


> On K3 #202 with latest firmware and the KRX3, turning the SUB ON, enabling 
> BSET, tapping XFIL cycles through the three filters that I have on the 
> SubRX... NOT the main board filters.
> 73,
> Ken K3IU
>
>
> Geoffrey Downs wrote:
>> It doesn't on mine. With B Set selected XFIL steps through the filters in 
>> the main rx.
>>
>> 73 to all
>>
>> Geoff
>> G3UCK
>>
>> ----- Original Message ----- From: "Lothar Sack" <Lothar at Sack-Erding.de>
>> To: <elecraft at mailman.qth.net>
>> Sent: Monday, September 22, 2008 5:01 PM
>> Subject: Re: [Elecraft] Selecting Filters in KRX3
>>
>>
>>> Yes, that is exactly how it works.
>>> Filters of the SUB-RX are changed by XFIL or WIDTH
>>> after selecting BSET.
>>> 55
>>> Lothar, DJ8EW
>>> K3 wid KRX3  2,7  + 1,0
>>>
>>>
>>> Don Wilhelm schrieb:
>>>> Roy,
>>>>
>>>> According to the manual, the XFIL button will switch between filters. 
>>>> Try BSET and then XFIL.
>>>> I am not certain that is currently implemented in the firmware, but it 
>>>> is worth a try.
>>>> I cannot try it because I have only one filter and do not have the 
>>>> KRX3.
>>>>
>>>> 73,
>>>> Don W3FPR
>>> _______________________________________________
>>> Elecraft mailing list
>>> Post to: Elecraft at mailman.qth.net
>>> You must be a subscriber to post to the list.
>>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>> http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/subscribers.htm
>>> Elecraft web page: http://www.elecraft.com
>>>
>>>
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft   Help: 
>> http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>