[Elecraft] K3 PSK31 with Digipan

[Lyle Johnson]

 > Just getting my new K3 working on PSK31 and noticed that it seems to be
 > > important to limit the range of the transmit frequency...

I just swept my K3 in DATA A mode.using the LINE IN jack for sourcing
the Tx audio.  It is flat from below 200 Hz to higher than 2800 Hz
using a 2.,8 kHz IF filter.

Be sure you don't have TxEQ set to restrict the transmit bandwidth.
TxEQ is active for *all* Tx audio paths in all modes.  For DATA A or
DATA AFSK, it should be flat.

73,

Lyle KK7P