[Elecraft] K3 TX equalizer messes up PSK

[Erik N Basilier]

These sound like good ideas, but please don't forget separate "eq modes" for 
the
data modes, unless flat eq is set automatically for all the data modes.
The latter approach would be fine for me, and a lot simpler. Does anyone 
have
a need for other than flat settings for data? As to the approach with "eq 
modes"
I assume that would be implemented as a new menu within CONFIG?

73,
Erik K7TV

----- Original Message ----- 
From: "Alexandr Kobranov" <kobranov at amoscz.cz>
Cc: <elecraft at mailman.qth.net>
Sent: Thursday, November 06, 2008 12:10 PM
Subject: Re: [Elecraft] K3 TX equalizer messes up PSK


You are right, Julian.

So what about to keep SSB FP MIc/SSB RP Mic/AM FP Mic/AM RP Mic/FM FP
MIc/FM/RP Mic as "independent modes" keeping their own TX/RX EQ Settings?
So yes, let´s have 10 EQ pre-sets and make table of possible "modes"
to keep information about EQ pre-set. There is no need to limit "mode"
only to CW/AM/FM/SSB - there are possible some more precious like Rear
or Front panel Mic used etc...why not.
Any other idea?

73!
L. -dst-