[Elecraft] Built in sound card

[Richard S. Lindzen]

Where does one get sr5.exe?

Tnx,

Dick, KA1SA

At 01:55 PM 5/24/2008, you wrote:

>Hi,
>
>If you have the latest firmware version, there is a new option in CONFIG:LIN
>OUT. Normally this is set to "nor" for normal. Press the 1 (A/B) button and
>it will change to "Phones". The line out will now contain the exact same mix
>you are hearing in the headphones, so by enabling transmit monitoring, you
>will be recording on transmit, too. Beware that the volume control (AF gain)
>will now affect the line output.
>
>I am not sure what your troubles with setting levels are. If you are unsure
>if the level is right due to the general lack of any VU metering on PC
>recording software, you can use an oscilloscope program (sr5.exe is free) to
>watch that you are not overdriving the A/D.
>
>Knut - AB2TC
>
>Lee (WW2DX) wrote:
> >
> > Hi All,
> >
> > Starting to do some recordings direct from the Line out on the K3 to
> > the Line in on my Mac.
> >
> > I'm having a hard time getting the levels right. I have more work to
> > do here so I will post more about that later.
> >
> > My question is how does one get the monitor to pass out the Line out?
> > I would like to record both sides of the QSO.
> > At the moment it seems the monitor gets muted when in TX.
> >
> > 73 de Lee
> > WW2DX
> > K3 #464
> >
> > <snip>
> >
>
>--
>View this message in context: 
>http://www.nabble.com/Built-in-sound-card-tp17432860p17450338.html
>Sent from the Elecraft mailing list archive at Nabble.com.
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com