[Elecraft] Built in sound card

[ab2tc]

Hi,

If you have the latest firmware version, there is a new option in CONFIG:LIN
OUT. Normally this is set to "nor" for normal. Press the 1 (A/B) button and
it will change to "Phones". The line out will now contain the exact same mix
you are hearing in the headphones, so by enabling transmit monitoring, you
will be recording on transmit, too. Beware that the volume control (AF gain)
will now affect the line output.

I am not sure what your troubles with setting levels are. If you are unsure
if the level is right due to the general lack of any VU metering on PC
recording software, you can use an oscilloscope program (sr5.exe is free) to
watch that you are not overdriving the A/D.

Knut - AB2TC

Lee (WW2DX) wrote:
> 
> Hi All,
> 
> Starting to do some recordings direct from the Line out on the K3 to  
> the Line in on my Mac.
> 
> I'm having a hard time getting the levels right. I have more work to  
> do here so I will post more about that later.
> 
> My question is how does one get the monitor to pass out the Line out?  
> I would like to record both sides of the QSO.
> At the moment it seems the monitor gets muted when in TX.
> 
> 73 de Lee
> WW2DX
> K3 #464
> 
> <snip>
> 

-- 
View this message in context: http://www.nabble.com/Built-in-sound-card-tp17432860p17450338.html
Sent from the Elecraft mailing list archive at Nabble.com.