[Elecraft] Built in sound card SR5

[n4lq]

Just put SR5.exe in Google. It's the first link that shows up.
Steve Ellington
N4LQ at insightbb.com
----- Original Message ----- 
From: "Richard S. Lindzen" <rlindzen at MIT.EDU>
To: "ab2tc" <ab2tc at arrl.net>
Cc: <elecraft at mailman.qth.net>
Sent: Sunday, May 25, 2008 2:17 AM
Subject: Re: [Elecraft] Built in sound card


> Where does one get sr5.exe?
>
> Tnx,
>
> Dick, KA1SA
>
> At 01:55 PM 5/24/2008, you wrote:
>
>>Hi,
>>
>>If you have the latest firmware version, there is a new option in 
>>CONFIG:LIN
>>OUT. Normally this is set to "nor" for normal. Press the 1 (A/B) button 
>>and
>>it will change to "Phones". The line out will now contain the exact same 
>>mix
>>you are hearing in the headphones, so by enabling transmit monitoring, you
>>will be recording on transmit, too. Beware that the volume control (AF 
>>gain)
>>will now affect the line output.
>>
>>I am not sure what your troubles with setting levels are. If you are 
>>unsure
>>if the level is right due to the general lack of any VU metering on PC
>>recording software, you can use an oscilloscope program (sr5.exe is free) 
>>to
>>watch that you are not overdriving the A/D.
>>
>>Knut - AB2TC
>>
>>Lee (WW2DX) wrote:
>> >
>> > Hi All,
>> >
>> > Starting to do some recordings direct from the Line out on the K3 to
>> > the Line in on my Mac.
>> >
>> > I'm having a hard time getting the levels right. I have more work to
>> > do here so I will post more about that later.
>> >
>> > My question is how does one get the monitor to pass out the Line out?
>> > I would like to record both sides of the QSO.
>> > At the moment it seems the monitor gets muted when in TX.
>> >
>> > 73 de Lee
>> > WW2DX
>> > K3 #464
>> >
>> > <snip>
>> >
>>
>>--
>>View this message in context:
>>http://www.nabble.com/Built-in-sound-card-tp17432860p17450338.html
>>Sent from the Elecraft mailing list archive at Nabble.com.
>>
>>_______________________________________________
>>Elecraft mailing list
>>Post to: Elecraft at mailman.qth.net
>>You must be a subscriber to post to the list.
>>Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>
>>Help: http://mailman.qth.net/subscribers.htm
>>Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 269.24.1/1464 - Release Date: 5/24/2008 
8:56 AM