[Elecraft] K3 Transverter Control Cable

[Ian J Maude]

Don Wilhelm wrote:
> Ian,
>
> Based on information I received from Wayne, I do believe that K3 ACC 
> pin 7 is now dedicated to TX INH.  There were complication in sharing 
> it.  If the change is not in the firmware version you are using, it 
> will be with a forthcoming update.  In other words, it cannot be used 
> for XVTR ON.  The +12 volt output from the back of the K3 should do 
> nicely even though it means "Y"ing out one of the cable wires.
Hi Don,
Thanks for the update.  I am running 2.02 and the rest of the latest 
firmware.  I have been merrily using my transverter but not for a few 
weeks as I moved the shack around and need to make up another power 
cable.  If this is the case, can we have a heads up from Elecraft please?

73 Ian

-- 

Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455