[Elecraft] k2--C167

[Don Wilhelm]

Scott,

Do not install anything at C167.  With the Rework Eliminators, you should
find a header for J11 - install that, and the jumper they are referring to
is on the board that plugs into that J11 header.

73,
Don W3FPR

> -----Original Message-----
>
> HI
> I'm a little confused, which is not unusual for me, on the last
> item on page 50 of the assemble manual for the K2.
> It says - Install C167 (.001 uf "102") which is near J11, the
> connector for the SSB adapter. The leads on this capacitor should
> be formed to match its PC board outline.
> The un-module manual say don't install C167 and install a jumper
> at J11.
> I'm inclined to believe that it is saying to install a jumper instead
> of C-167. Is this correct. Sure would hate to smoke a PCB by putting
> a jumper where it shouldn't be.
> Any help would be appreciated.
> Scott N5SM
>
>