[Elecraft] K2-S-Meter Alignment question

[Don Wilhelm]

Gary,

You missed one prior step - enter the menu and edit 'CAL S Hi' first, and
then the VFO knob should work as described - you should see a display like
'S HI 018' (the number will change as you rotate the VFO knob).

73,
Don W3FPR


> -----Original Message-----
> Under S-Meter Alignment:
>
> The forth step says:
> Turn RF Gain fully counter-clockwise. Adjust the VFO knob until
> bargraph segment 9 lights, then turn it a bit more
> counter-clockwise until segment 10 just turns on (right-most segment).
>
> Question: Should this have said RF Gain instead of VFO knob ?
> Turning the VFO does nothing while turning the RF Gain knob
> performs what the instructions say.
>
>