[Elecraft] K2/100 RS-232 Problem & Logger 32

[Vic K2VCO]

Bob Wehking wrote:
> I completed the KPA100 & everything works except I can't get the K2
> to communicate with Logger32. I setup the radio for COM1, 4800 baud,
> 2 stop bits, no parity. Kenwood-all & have toggled both DTR & RTS on
> & off. The cable is wired correctly based on the manual. I've checked
> all the solder joints on the amplifier board associated with U4 &
> they all look good. I also checked the resistance of all RF chokes
> associated with U4.

Just in case you've missed the obvious, I note that you don't mention 
setting PORT to ON in the K2 menu.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco