[Elecraft] K2/100 RS-232 Problem & Logger 32

[Bob Wehking]

I completed the KPA100 & everything works except I can't get the K2 to communicate with Logger32. I setup the radio for COM1, 4800 baud, 2 stop bits, no parity. Kenwood-all & have toggled both DTR & RTS on & off. The cable is wired correctly based on the manual. I've checked all the solder joints on the amplifier board associated with U4 & they all look good. I also checked the resistance of all RF chokes associated with U4. 

My Icom 756Pro works fine with  Logger 32