[Elecraft] K2/100 RS-232 Problem & Logger 32

[Brian Mury]

On Thu, 2005-09-22 at 08:45 -0400, Bob Wehking wrote:
> I completed the KPA100 & everything works except I can't get the K2 to
> communicate with Logger32. I setup the radio for COM1, 4800 baud, 2
> stop bits, no parity. Kenwood-all & have toggled both DTR & RTS on &
> off. The cable is wired correctly based on the manual. I've checked
> all the solder joints on the amplifier board associated with U4 & they
> all look good. I also checked the resistance of all RF chokes
> associated with U4. 

My K2/100 works fine with Logger32. My settings are the same as yours (I
have DTR and RTS unchecked).

Have you tried turning on the "Show Radio Debug Window" option and see
what's being sent and received?

Have you tried using the K2 with a different program? You could try it
with a simple terminal program and type the commands manually.

Have you turned PORT on in the K2's secondary menu?