[Elecraft] PLL Reference Oscillator Range Test

Sun Mar 21 20:47:00 2004

Don,
Where did the 10.04 KHz come from?
When I subtract 12085.29 from 12098.98 I get 13.69 KHz (which is on the high
side).
Did I miss somthing?

Frank - W6NEK

----- Original Message ----- 
From: "Don Wilhelm" <[email protected]>
To: "Don Ingram" <[email protected]>; <[email protected]>
Sent: Sunday, March 21, 2004 4:50 PM
Subject: Re: [Elecraft] PLL Reference Oscillator Range Test

> Don,
>
> 10.4 IS between 9.8 and 13 - so all is well.  Any value between 9.8 and 13
> is adequate to meet the requirements.  Enjoy building.
>
> 73,
> Don W3FPR
>
> ----- Original Message ----- 
>
> Hi, I am working on my K2 and have just finished Part II assembly.  I ran
> into difficulty with the PLL Reference Oscillator Range Test. The Ref.
High
> Freq. is 12098.98 and the low is 12085.29.  The manual states that the
range
> must be  between 9.8 and 13 kHz. This is 10.04kHz.  Is that close enough??
> or must it be exact?
>
> snip...
>
>
> _______________________________________________
> Elecraft mailing list: [email protected]
> You must be subscribed to post to the list.
> To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com
> Also see: http://www.elecraft.com/elecraft_list_guidelines.htm
>