[Elecraft] no power

[John Cooper]

Last night I resoldered a lot of the joints on the control board and rf =
board because I have an intermittent problem with 17M(which I think is =
because of a cold joint, cause sometimes it works sometimes not).  Just =
got a new Hakko soldering iron.  Did something bad cause now It wont =
even come on.  When pluged in with power supply on I get 13.7V from J3 =
PLug to both sides of F1 the thermal fuse and one side of the switch.  =
When swith is cycled the voltage dissapears on side of the F1 Fuse.  =
Everything from J3 to R115 apears to be fine.  From R115 where does it =
go? =20

Pins 1 and 2 on J7 are labeled 12V like the smaller power schematic in =
Apendix B. =20

It did work before I started messing with it.  All bands fine except 17M =
 which has a flutery sound where the signals are constantly breaking up. =
=20

Happy New years! off to work, hope fully some one has some ideas.


WT5Y

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---