[Elecraft] K2/XV50 - firmware update - help

Mon Apr 5 07:12:01 2004

Tnx Don for the info.
N2TK, Tony.

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Don Brown
Sent: Sunday, April 04, 2004 11:57 AM
To: [email protected]; Elecraft (E-mail)
Subject: Re: [Elecraft] K2/XV50 - firmware update - help

Hi

I just happen to have a K2 I just finished building on the bench and it has
the new firmware. I tried setting up a 6 meter transverter in the menu and I
get the same thing you are getting. Fore some reason it defaults to
36100.00. All you need to do is key in 50 Mhz directly by tapping both band
buttons then key in 50000 on the keypad and you should be running. I checked
this with my signal generator and the radio is receiving on 28000.00 as it
should when set to 50000.00 for the 6 meter transverter.

Don Brown
KD5NDB
  ----- Original Message -----
  From: N2TK<mailto:[email protected]>
  To: Elecraft (E-mail)<mailto:[email protected]>
  Sent: Sunday, April 04, 2004 11:36 AM
  Subject: [Elecraft] K2/XV50 - firmware update - help

  Updated Firmware from 2.03D to 2.04P. When I did that my readout when
using
  the XV50 changed from 50100.00 to 36100.00. I also upgraded the K2 IOC
from
  1.07 to 1.09. That did not make any changes in the readout on the K2 when
  inTRN1 position.
  Do I need to do something else when changing the firmware? I have TRN1 -
ON,
  RF-50, IF-28, OFS - 0.00, OUT - H12.7, ADR-TRN1. This is the same with
  either MCU. I went back to 2.03D.
  Tnx for any input.
  #3481
  N2TK, Tony

  _______________________________________________
  Elecraft mailing list:
[email protected]<mailto:[email protected]>
  You must be subscribed to post to the list.
  To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft<http://mailman.qth.net/mail
man/listinfo/elecraft>
  Elecraft Web Page: http://www.elecraft.com<http://www.elecraft.com/>
  Also see:
http://www.elecraft.com/elecraft_list_guidelines.htm<http://www.elecraft.com
/elecraft_list_guidelines.htm>

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
Elecraft mailing list: [email protected]
You must be subscribed to post to the list.
To subscribe or unsubscribe see:
http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com
Also see: http://www.elecraft.com/elecraft_list_guidelines.htm