[Elecraft] K2/XV50 - firmware update - help
Don Brown
[email protected]
Sun Apr 4 11:58:01 2004
Hi
I just happen to have a K2 I just finished building on the bench and it =
has the new firmware. I tried setting up a 6 meter transverter in the =
menu and I get the same thing you are getting. Fore some reason it =
defaults to 36100.00. All you need to do is key in 50 Mhz directly by =
tapping both band buttons then key in 50000 on the keypad and you should =
be running. I checked this with my signal generator and the radio is =
receiving on 28000.00 as it should when set to 50000.00 for the 6 meter =
transverter.
Don Brown
KD5NDB
----- Original Message -----=20
From: N2TK<mailto:[email protected]>=20
To: Elecraft (E-mail)<mailto:[email protected]>=20
Sent: Sunday, April 04, 2004 11:36 AM
Subject: [Elecraft] K2/XV50 - firmware update - help
Updated Firmware from 2.03D to 2.04P. When I did that my readout when =
using
the XV50 changed from 50100.00 to 36100.00. I also upgraded the K2 IOC =
from
1.07 to 1.09. That did not make any changes in the readout on the K2 =
when
inTRN1 position.
Do I need to do something else when changing the firmware? I have TRN1 =
- ON,
RF-50, IF-28, OFS - 0.00, OUT - H12.7, ADR-TRN1. This is the same with
either MCU. I went back to 2.03D.
Tnx for any input.
#3481
N2TK, Tony
_______________________________________________
Elecraft mailing list: =
[email protected]<mailto:[email protected]>
You must be subscribed to post to the list.
To subscribe or unsubscribe see: =
http://mailman.qth.net/mailman/listinfo/elecraft<http://mailman.qth.net/m=
ailman/listinfo/elecraft>
Elecraft Web Page: http://www.elecraft.com<http://www.elecraft.com/>
Also see: =
http://www.elecraft.com/elecraft_list_guidelines.htm<http://www.elecraft.=
com/elecraft_list_guidelines.htm>
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed. To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html ---