[Elecraft] KX1 problem?

[John Mahon]

Rick,
To set the filter trimmers I used a jewelers screwdriver covered with 
electrical tape where it was held.
I then simply listened for greatest signal strength.
Good luck,
John N2YC
KX1 #336

Rick Dettinger wrote:

>When I use my XG1 to set the S9 level on my K2 with a wide filter and then change to a 200 hz. filter, the meter goes to S8.  When I try the same with my new KX1, the meter goes from S9 to S1.  This is with the filter in the narrowest setting.  Is this a problem?  Also, can anyone tell me what kind of tool that works well to set the 20 and 40 meter bandpass filters in the KX1.  None of my alignment tools seems to work well.  Is it a good idea to use a multimeter at the headphone jack to set the filters?   Thanks -  Rick - K7MW
>
>
>--- StripMime Report -- processed MIME parts ---
>multipart/alternative
>  text/plain (text body -- kept)
>  text/html
>The reason this message is shown is because the post was in HTML
>or had an attachment.  Attachments are not allowed.  To learn how
>to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
>_______________________________________________
>Elecraft mailing list: Elecraft@mailman.qth.net
>You must be subscribed to post to the list.
>To subscribe or unsubscribe see: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com
>Also see: http://www.elecraft.com/elecraft_list_guidelines.htm
>
>  
>