[Elecraft] Building the K2

[Harry Yingst]

Same in the Rev E manual as well


--- Ted Buckley <tedb@aracnet.com> wrote:
> In the Elecraft K-2 manual, on the 1st page of Appendix B (rev D)
> appear 
> drawings showing the pin out of the devices used in the K-2.
> 73, Ted WA7DFD K-2 3202
> 
> At 04:38 PM 5/15/03 -0500, Stuart Rohre wrote:
> >For the question on which side of transistors is the emitter or
> collector:
> >
> >The plastic types can vary, so the instructions tell you to orient
> the
> >transistor at any particular spot the same as the silk screen
> outline on the
> >boards.   The plastic ones have a flat, and round the rest of the
> way
> >around.  This is clearly shown on the silk screen and ensures your
> getting
> >the collector and emitter into the right holes.
> >72,
> >Stuart K5KVH
> >
> >
> >_______________________________________________
> >Elecraft mailing list: Elecraft@mailman.qth.net
> >You must be a list member to post to the list.
> >Postings must be plain text (no HTML or attachments).
> >See: http://mailman.qth.net/mailman/listinfo/elecraft
> >Elecraft Web Page: http://www.elecraft.com
> 
> 
> _______________________________________________
> Elecraft mailing list: Elecraft@mailman.qth.net
> You must be a list member to post to the list. 
> Postings must be plain text (no HTML or attachments). 
> See: http://mailman.qth.net/mailman/listinfo/elecraft
> Elecraft Web Page: http://www.elecraft.com


=====
Harry - AB2PN

__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com