[Elecraft] Building the K2

[Ted Buckley]

In the Elecraft K-2 manual, on the 1st page of Appendix B (rev D) appear 
drawings showing the pin out of the devices used in the K-2.
73, Ted WA7DFD K-2 3202

At 04:38 PM 5/15/03 -0500, Stuart Rohre wrote:
>For the question on which side of transistors is the emitter or collector:
>
>The plastic types can vary, so the instructions tell you to orient the
>transistor at any particular spot the same as the silk screen outline on the
>boards.   The plastic ones have a flat, and round the rest of the way
>around.  This is clearly shown on the silk screen and ensures your getting
>the collector and emitter into the right holes.
>72,
>Stuart K5KVH
>
>
>_______________________________________________
>Elecraft mailing list: Elecraft@mailman.qth.net
>You must be a list member to post to the list.
>Postings must be plain text (no HTML or attachments).
>See: http://mailman.qth.net/mailman/listinfo/elecraft
>Elecraft Web Page: http://www.elecraft.com